RS 1100 R

Scaffoldings

RS 1100 R

FOLDING MOBILE SCAFFOLD – EXTENDED

RS 1100 R

The scaffolding is used to carry out assembly and installation work inside and outside buildings, with limited space.It is easy to adjust thanks to rubber wheels with a 125 mm diameter brake. Possibility to use the base itself and buy additional elements for expansion.Location of the platform at any height, i.e. every rung of the ladder frame (not higher than 0.9 m in the basic version and 1.74 m in the extended version).
Low scaffolding weight due to the aluminiumconstruction.The entrance hatch in the platform is open.
Maximum working height of the whole structure 3.74 m.
Simple operation, assembly and disassembly of the scaffold (no tools required).
Easier to transport due to the small area after folding.
Maximum working load – 200 kg/m2 (approx. 2.0 kN/m2).

Technical data

Scaffolding parameters – base (variant I)			RS 1100R
Number of steps			6+6
Maximum scaffolding height	H	[m]	1,98
Maximum height to the platform	H1	[m]	0,90
Maximum working height		[m]	2,90
Platform dimensions – working surface		[m x m]	0,65 x 2,05
Ladder frame width	S1	[m]	0,86
Ladder frame spacing	S2	[m]	2,05
Weight		[kg]	45,6
Obciążenie podestu 2,0 kN/m²
NAME OF PARTS – base (variant I)			Liczba (szt.)
Zespół jezdny (koło fi 125 z pełnymi oponami gumowymi)			4
Rama drabinowa nośna	0,86 x 1,91	[m]	2
Podest z otwieranym włazem wejściowym	0,65 x 2,05	[m]	1
Zawias przegubowy			1
Przetyczka			1

Scaffolding parameters – extended version (variant II)			RS 1100R
Number of steps			10+10
Maximum scaffolding height	H	[m]	2,88
Maximum height to the platform	H1	[m]	1,74
Maximum working height		[m]	3,74
Platform dimensions – working surface		[m x m]	0,65 x 2,05
Ladder frame width	S1	[m]	0,86
Ladder frame spacing	S2	[m]	2,05
Weight		[kg]	66,92
Obciążenie podestu 2,0 kN/m²
NAME OF PARTS – extended version (variant II)		Nr kat.	Liczba (szt.)
Shorthandrailframe – 4 rungs 0,86 x 1,1 [m]		311.13	2
Diagonal concentration 2,56 [m]		310.06	1
Handrail – 2,0 [m]		310.05	7

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

Scaffoldings

RD 100

4-FUNCTION LADDER SCAFFOLD

RD 100

Lightweight and multifunctional ladder scaffold consisting of two resistive ladders and a platform.

It can be used as: a wide-spanning ladder, a resistive ladder (attached), a working platform, a working platform with a staircase.

The stability of the structure is forced by the use of stabilizers at the base of 6-rung ladders.

The surface of the platform is non-slip and at the same time protected against moisture.

Maximum working load – 200 kg/m2 (approx. 2 kN/m2).

Use in places with different ground level heights.

The height of the platform can be adjusted in steps of the ladder frame.

A railing can be purchased.

Corresponds to PN-EN 131 standard.

Technical data

Scaffolding parameters			RD 100
Maximum working load			200 kg/m²
Number of rungs			6+6
Maximum height of the scaffolding structure	H	[m]	1,84
Maximum height to the highest platform	H1	[m]	0,92
Height after installation	H2	[m]	1,74
Total height – ladder function	H3	[m]	2,68
Maximum working height		[m]	2,92
Spacing – ladder function	C	[m]	1,28
Platform dimensions – working surface		[m x m]	0,44 x 1,25
Width	S	[m]	0,44
Width with stabilizers	D	[m]	0,61
Length	L	[m]	1,49
Weight		[kg]	14,90

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

RJ 220

Scaffoldings

RJ 220

MOBILE SCAFFOLD

RJ 220

The scaffolding is used to carry out assembly and installation work inside and outside buildings, with limited space.

Low weight of the scaffolding due to the aluminium structure.

Simple scaffolding assembly and disassembly.

Convenient movement of the scaffolding thanks to the use of a strong steel trolley equipped with foot brakes swivel wheel.

Rubber wheels with a 160 mm diameter brake.

Opening entrance hatch in the platform.

Conforms to EN 1004 standard.

Technical data

Scaffolding parameters			Dimensions
Minimum scaffold height	H	[m]	2,32
Maximum scaffold height	H1	[m]	3,72
Minimum height of the working platform	H2	[m]	0,86
Maximum height of the working platform	H3	[m]	2,26
Working platform jump		[m]	0,28
Minimum working height		[m]	2,86
Maximum working height		[m]	4,26
Platform dimensions – working surface		[m x m]	0,52 x 1,80
Minimum width of stabilisers	D1	[m]	1,16
Maximum width of stabilisers	D2	[m]	1,80
Scaffolding length	L	[m]	2,20
Weight		[kg]	82

Name of the part			No.	Quantity
Roadway assembly			100.01	1
Ladder frame fixed left – 7 rungs	2,05 x 0,69	[m]	100.02	1
Ladder frame fixed right – 7 rungs	2,05 x 0,69	[m]	100.07	1
Platform with sides			100.12	1
Rear diagonal brace	2,53	[m]	100.05	1
Handrail	1,85	[m]	100.06	4
Left-hand moving ladder frame – 7 rungs	2,00 x 0,62	[m]	100.03	1
Right-hand movable ladder frame – 7 rungs	2,00 x 0,62	[m]	100.08	1
Frontal diagonal brace	2,53	[m]	100.09	1
Handles for platform height adjustment			100.10	1

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

RS 600

Scaffoldings

RS 600

FOLDING MOBILE SCAFFOLD

RS 600

The scaffolding is used to carry out assembly and installation work inside and outside buildings, with limited space.

It is easy to move thanks to rubber wheels with a 125 mm diameter brake.

Low weight of the scaffolding due to the aluminium construction.

Easy handling, assembly and disassembly of the scaffold (without tools).

Easier to transport due to the small area after folding.

Maximum working load – 150 kg/m2 (approx. 1.5 kN/m2).

Conforms to EN 131.

Technical data

Scaffolding parameters			RS 600
Number of steps			6+6
Maximum scaffolding height	H	[m]	1,84
Maximum height to the platform	H1	[m]	0,90
Maximum working height		[m]	2,90
Platform dimensions – working surface		[m x m]	0,52 x 1,90
Ladder frame width	S1	[m]	0,68
Ladder frame spacing	S2	[m]	1,90
Weight		[kg]	33

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

RS 500

Scaffoldings

RS 500

FOLDING SCAFFOLD

RS 500

The scaffolding is used for light assembly and installation work inside and outside buildings, with limited space.

It is easy to move thanks to rubber wheels with a 75 mm diameter brake.

Low weight of the scaffolding due to the aluminium construction.

Easy handling, assembly and disassembly of the scaffold.

Easier to transport due to the small area after folding.

Maximum working load – 200 kg/m2 (approx. 2 kN/m2).

Railing can be purchased.

Complies with standard PN-EN 131.

Technical data

Scaffolding parameters			RS 500
Number of steps			6+6
Total height	H	[m]	2,04
Working platform height	H1	[m]	0,99
Working height		[m]	2,99
Overall length	L	[m]	1,54
Overall width	D	[m]	0,78
Depth after folding	F	[m]	0,17
Platform width x depth		[m x m]	1,25 x 0,50
Weight		[kg]	22

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

RA 600

Scaffoldings

RA 600

MOBILE SCAFFOLD

RA 600

The scaffolding is used for construction, assembly and installation work inside and outside buildings.

The low weight of the scaffolding due to its aluminium structure enables easy movement.

Simple operation, assembly and disassembly of the scaffolding (without using tools).

Very comfortable moving of the scaffolding thanks to the use of strong chassis equipped with foot brakes swivel and wheel rotation.

Wheels with 150 mm diameter.

Opening entrance hatch in the platform.

Additional entrance step.

Possibility of levelling irregularities up to 0,18 m.

High structural stability thanks to four supports and frames with a diameter of 50 mm and 28 mm rungs.

Maximum working load – 150kg/m2 (approx. 1.5kN/m2)

Corresponds to standard EN 1004

It has a safety mark “B”.

Technical data

Scaffolding parameters				220	221	222	223
Maximum scaffolding height		H	[m]	3,03	4,71	4,71	6,39
Maximum height to the highest platform		H1	[m]	1,80	2,92	3,76	5,16
Maximum working height			[m]	3,80	4,92	5,76	7,16
Platform dimensions – working surface			[m x m]	0,52 x 1,90
Ladder frame dimensions		S1	[m]	0,68
Ladder frame spacing		S2	[m]	1,90
Width with supports		D1	[m]	2,54
Length with supports		D2	[m]	3,00
Weight			[kg]	69,00	80,10	103,80	104,70
Name of the part			No.	Number (pieces)
Roadway assembly			220.01	4	4	4	4
Cpl. supports	1,74	[m]	220.02	4	4	4	4
Supporting ladder frame – 6 rungs	0,68 x 1,68	[m]	220.03	2	2	2	2
Ladder frame – 6 rungs	0,68 x 1,68	[m]	220.04	–	2	2	4
Railing ladder frame -4 rungs	0,68 x 1,12	[m]	220.05	2	2	2	2
Platform with sides	0,52 x 1,90	[m]	220.6	1	1	2	2
Handrail	1,90	[m]	220.06	8	8	14	14
Diagonal concentration	2,40	[m]	220.08	2	4	4	6
Hook			–	4	8	8	12
Additional equipment
Anchor unit	1,27	[m]	220.09	–	–	–	2
Ballast weights			100.11	In accordance with the manual
Fixed hinge – cross-connection			310.08.02	–	–	2	2
Soft polyurethane wheel			220.01/A
Adjustable foot			220.10
Additional degree			220.11	Mandatory element

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RS 1100 R

RD 100

RJ 220

RS 600

RS 500

RA 600

RA 330

RA 1130

RA 1120

RA 1130 S

RA 1120 S

RA 1130 / R

RA 1120 / R

RA 330

Scaffoldings

RA 330

MOBILE SCAFFOLD

RA 330

The scaffolding is used for all construction and installation work inside and outside buildings.

Simple scaffolding assembly and disassembly.

Convenient movement of the scaffolding thanks to the use of a mobile ladder frame.

Maximum working load 200 kg/m2.

Light and stable aluminium construction.

Frames made of pipes of 50 mm diameter and rungs of 28 mm diameter.

Scaffolding can be placed on different levels.

Opening entrance hatch in the platform.

Conforms to EN 1004.

It has a safety mark “B”.

Technical data

Scaffolding parameters				410	411	412
Maximum scaffolding height		H	[m]	2,36	3,48	4,50
Maximum height to the highest platform		H1	[m]	1,05	2,20	3,30
Maximum working height			[m]	3,05	4,20	5,30
Platform dimensions – working surface			[m x m]	0,52 x 1,50
Ladder frame dimensions		S1	[m]	0,68	0,68	0,68
Ladder frame spacing		S2	[m]	1,50	1,50	1,50
Width with stabilizers		D1	[m]	1,31	1,31	1,31
Length		D2	[m]	1,76	1,76	1,76
Weight			[kg]	35,70	43,70	49,70

Name of the part			No.	Number (pieces)
Mobile ladder frame – 8 rungs	dł. 2,24	[m]	410.01	1	1	1
Supporting ladder frame – 8 rungs	dł. 2,24	[m]	410.02	1	1	1
Ladder frame – 4 rungs	dł. 1,12	[m]	410.03	–	1	1
Handrail frame – 4 rungs	dł. 1,12	[m]	410.04	–	1	1
Handrail frame – 8 rungs	dł. 2,24	[m]	410.05	–	–	1
Platform set	0,52 x 1,50	[m x m]	410.06	1	1	1
Handrail	1,5	[m]	410.07	8	8	8
Diagonal concentration	1,8	[m]	410.08	1	3	4
Picker – included in the platform set			–	–	4	6

Additional equipment
Stair support 1 piece			410.10	In accordance with the manual 5.2.2 of this chapter.
Fixed stabilizer			410.02.00.00 poz.9	1	1	1
Driving stabiliser			410.01.00.00 poz.10	1	1	1
Anchor unit			220.09	In accordance with the manual 5.2.2 of this chapter.
Ballast weights			100.11	In accordance with the manual 5.2.1 of this chapter.

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

RA 1130

Scaffoldings

RA 1130

MOBILE SCAFFOLD

RA 1130* old version of the scaffolding
(no possibility of placing the platform at any height, i.e. at any rung of the ladder frame).

The scaffolding is used for all construction, assembly and installation work inside and outside buildings.

High quality and durability of construction materials.

Frames are made of pipes with a diameter of 50 mm and rungs of 50 mm diameter, with a corrugated surface on the whole perimeter.

Possibility of levelling irregularities up to 0.26 m.

Platform dimensions – working surface 0.65 x 3.00 m.

Hard wheels with a brake with a diameter of 200 mm.

Opening entrance hatch in the platform.

Maximum working load – 150kg/m2 (approx. 1.5kN/m2)

Corresponds to standard EN 1004

It has a safety mark “B”.

Technical data

SCAFFOLDING PARAMETERS				320	321A	321B	322A	322B	323A	323B	324A	324B
Maximum scaffolding height		H	[m]	3,29	5,25	5,25	7,21	7,21	9,17	9,17	11,25	11,25
Maximum height to the highest platform		H1	[m]	2,15	4,11	4,11	6,07	6,07	8,03	8,03	9,99	9,99
Maximum working height			[m]	4,15	6,11	6,11	8,07	8,07	10,03	10,03	11,99	11,99
Platform dimensions – working surface			[mxm]	0,65 x 3,00
Ladder frame dimensions		S1	[m]	0,76
Ladder frame spacing		S2	[m]	3,00
Width with supports		D1	[m]	3,19
Length with supports		D2	[m]	4,43
Weight			[kg]	98,4	181,4	139	244,2	207,2	317,8	233	386	301,2

NAME OF PARTS			No.	NUMBER (pcs.)
Chassis (Cpl.hard wheel fi 200)			310.01	4	4	4	4	4	4	4	4	4
Scaffold support	2,11	[m]	310.02	0	4	4	4	4	4	4	4	4
Ladder frame– 7 rungs	1,96×0,76	[m]	310.03	2	4	4	6	6	8	8	10	10
Platform with sides	0,65×3,00	[m]	320.01	1	2	1	3	2	4	2	5	3
Scaffold railing	3,0	[m]	320.03	6	12	8	18	14	24	16	30	22
Diagonal concentration	3,3	[m]	320.03	2	4	4	6	6	8	8	10	10
Short handrail frame – 4 rungs	1,1×0,76	[m]	310.07	2	2	2	2	2	2	2	2	2
Horizontal diagonal concentration	3,1	[m]	320.04	1	1	1	1	1	1	1	1	1
Hook			–	4	8	8	12	12	16	16	20	20

EXTENSION OF SCAFFOLDING RANGE WITH INTERMEDIATE HEIGHT – ELEMENTS REQUIRED FOR EXTENSION
Max. height to the highest platform	H1	[m]		3,27	5,23	5,23	7,19	7,19	9,15	9,15	prohibited
Short ladder frame– 4 rungs	1,12×0,76	[m]	310.10	2	2	2	2	2	2	2	prohibited
Scaffold railing	3,0	[m]	320.01	2	2	6	2	2	2	6	prohibited
Platform with sides	0,65×3,00	[m]	320.01	0	0	1	0	0	0	1	prohibited
Hook			–	4	4	4	4	4	4	4	prohibited

ACCESSORIES
Anchor unit	1,77	[m]	310.08	–	–	–	2	2	4	4	4	4
Ballast weights			100.11	in accordance with the handling point 5.2.2
Permanent hinge – cross-connection			310.08.02	–	–	–	2	2	2	2	2	2
Soft polyurethane wheel			310.01/A
Adjustable foot			310.11
Additional degree			310.12	mandatory

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

RA 1120

Scaffoldings

RA 1120

MOBILE SCAFFOLD

RA 1120* old version of the scaffolding
(no possibility of placing the platform at any height, i.e. at any rung of the ladder frame).

The scaffolding is used for all construction, assembly and installation work inside and outside buildings.

High quality and durability of construction materials.

Frames are made of pipes with a diameter of 50 mm and rungs of 50 mm diameter, with a corrugated surface on the whole perimeter.

Possibility of levelling irregularities up to 0.26 m.

Platform dimensions – working surface 0.65 x 2.05 m.

Hard wheels with a brake with a diameter of 200 mm.

Opening entrance hatch in the platform.

Maximum working load – 200kg/m2 .

Corresponds to PN-EN 1004 standard.

It has a safety mark “B”.

Technical data

SCAFFOLDING PARAMETERS				310	311A	312A	313A	314A
Maximum scaffolding height		H	[m]	3,29	5,25	7,21	9,17	11,25
Maximum height to the highest platform		H1	[m]	2,15	4,11	6,07	8,03	9,99
Maximum working height			[m]	4,15	6,11	8,07	10,03	11,99
Platform dimensions – working surface			[mxm]	0,65 x 2,05
Ladder frame dimensions		S1	[m]	0,76
Ladder frame spacing		S2	[m]	2,00
Width with supports		D1	[m]	3,19
Length with supports		D2	[m]	3,49
Weight			[kg]	83	151,22	204,6	258	311,4

NAME OF PARTS			No.	NUMBER (pcs.)
Chassis (Cpl.hard wheel fi 200)			310.01	4	4	4	4	4
Scaffold support	2,11	[m]	310.02	0	4	4	4	4
Ladder frame– 7 rungs	1,96×0,76	[m]	310.03	2	4	6	8	10
Platform with sides	0,65×2,05	[m]	310.04	1	2	3	4	5
Scaffold railing	2,0	[m]	310.05	6	12	18	24	30
Diagonal concentration	2,5	[m]	310.06	2	4	6	8	10
Short handrail frame – 4 rungs	1,1×0,76	[m]	310.07	2	2	2	2	2
Horizontal diagonal concentration	2,1	[m]	310.09	1	1	1	1	1
Hook			–	4	8	12	16	20

EXTENSION OF SCAFFOLDING RANGE WITH INTERMEDIATE HEIGHT – ELEMENTS REQUIRED FOR EXTENSION
Max. height to the highest platform	H1	[m]		3,27	5,23	7,19	9,15	prohibited
Short ladder frame– 4 rungs	1,12×0,76	[m]	310.10	2	2	2	2	prohibited
Scaffold railing	2,0	[m]	310.05	2	2	2	2	prohibited
Platform with sides	0,65×2,05	[m]	310.04	0	0	0	0	prohibited
Hook			–	4	4	4	4	prohibited

ACCESSORIES
Anchor unit	1,77	[m]	310.08	–	–	2	4	4
Ballast weights			100.11	in accordance with the handling point 5.2.2
Fixed hinge (cross-connection)			310.08.02	–	–	2	2	2
Soft polyurethane wheel			310.01/A
Adjustable foot			310.11
Additional degree			310.12	mandatory

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RA 1130 / R

RA 1120 / R

RA 1130 S

RA 1120 S

RA 1130

RA 1120

RA 600

RA 330

RJ 220

RS 1100 R

RS 600

RS 500

RD 100

RA 1130 S

Scaffoldings

RA 1130 S

MOBILE SCAFFOLD

RA 1130 S

The scaffolding is used for construction, assembly and installation work inside and outside buildings.

High quality and durability of construction materials.

Frames made of pipes with a diameter of 50 mm and rungs of 50 mm diameter, with corrugated surface all around.

Platform dimensions – working area 1.35 x 3.00 m.

Assembly and disassembly without tools.

Possibility of levelling out unevenness up to 0,26 m.

Hard wheels with brake 200 mm diameter.

Opening entrance hatch in the platform.

Maximum working load – 150 kg/m2

Corresponds to standard EN 1004

It has a safety mark “B”.

Technical data

SCAFFOLDING PARAMETERS				360	361A	361B	362A	362B	363A	363B	364A	364B
Maximum scaffolding height		H	[m]	3,29	5,25	5,25	7,21	7,21	9,17	9,17	11,25	11,25
Maximum height to the highest platform		H1	[m]	2,15	4,11	4,11	6,07	6,07	8,03	8,03	9,99	9,99
Maximum working height			[m]	4,15	6,11	6,11	8,07	8,07	10,03	10,03	11,99	11,99
Platform dimensions – working surface			[mxm]	1,35×3,00
Ladder frame dimensions		S1	[m]	1,35
Ladder frame spacing		S2	[m]	3,00
Width with supports		D1	[m]	3,78
Length with supports		D2	[m]	4,43
Weight			[kg]	173,3	225,8/257,8	185	302,6/366,6	260,2 /292,2	377,9/473,6	293,1/325,1	453,2/581,2	368,4/432,4

NAME OF PARTS			No.	NUMBER (pcs.)
Chassis (Cpl.hard wheel fi 200)			310.01	4	4	4	4	4	4	4	4	4
Scaffold support	2,11	[m]	310.02	0	4	4	4	4	4	4	4	4
Ladder frame – 7 rungs	1,96×1,35	[m]	350.01	2	4	4	6	6	8	8	10	10
Platform with sides	0,65×3,00	[m]	320.01	2	3 lub 4	2	4 lub 6	3 lub 4	5 lub 8	3 lub 4	6 lub 10	4 lub 6
Scaffold railing	3,0	[m]	320.02	6	13 lub 12	8	20 lub 18	15 lub 14	27 lub 24	17 lub 16	34 lub 30	24 lub 22
Diagonal concentration	3,3	[m]	320.03	2	4	4	6	6	8	8	10	10
Short handrail frame – 4 rungs	1,1×1,35	[m]	350.02	2	2	2	2	2	2	2	2	2
Horizontal diagonal concentration	3,29	[m]	350.05	1	1	1	1	1	1	1	1	1
The Bolt			350.06	2	4	2	6	4	8	4	10	6
Hook			–	4	8	8	12	12	16	16	20	20

EXTENSION OF SCAFFOLDING RANGE WITH INTERMEDIATE HEIGHT – ELEMENTS REQUIRED FOR EXTENSION
Max. height to the highest platform	H1	[m]		3,27	5,23	5,23	7,19	7,19	9,15	9,15	prohibited
Short ladder frame – 4 rungs	1,12×1,35	[m]	350.04	2	2	2	2	2	2	2	prohibited
Scaffold railing	3,0	[m]	320.02	2	2	7	2	2	2	7	prohibited
Platform with sides	0,65×3,00	[m]	320.01	0	0	1	0	0	0	1	prohibited
Hook			–	4	4	4	4	4	4	4	prohibited

ACCESSORIES
Anchor unit	1,77	[m]	310.08	–	–	–	2	2	4	4	4	4
Ballast weights			100.11	in accordance with the handling point 5.2.2
Permanent hinge – cross-connection			310.08.02	–	–	–	2	2	2	2	2	2
Soft polyurethane wheel			310.01/A
Adjustable foot			310.11
Additional degree			310.12	mandatory

NOTE: The dimensions given in the table are approximate. The photographs are for illustrative purposes only.

Gallery

All scaffoldings

RS 1100 R

RD 100

RJ 220

RS 600

RS 500

RA 600

RA 330

RA 1130

RA 1120

RA 1130 S

RA 1120 S

RA 1130 / R

RA 1120 / R

Products

Products

RS 1100 R

Scaffoldings

RS 1100 R

Technical data

Gallery

Opening entrance hatch in the platform.

All scaffoldings

RD 100

Scaffoldings

RD 100

Technical data

Gallery

The stability of the structure is forced by the use of stabilizers at the base of 6-rung ladders.

All scaffoldings

RJ 220

Scaffoldings

RJ 220

Technical data

Gallery

Rubber wheels with a 160 mm diameter brake.

All scaffoldings

RS 600

Scaffoldings

RS 600

Technical data

Gallery

Low weight of the scaffolding due to the aluminium construction.

All scaffoldings

RS 500

Scaffoldings

RS 500

Technical data

Gallery

Easy handling, assembly and disassembly of the scaffold.

All scaffoldings

RA 600

Scaffoldings

RA 600

Technical data

Gallery

High structural stability thanks to four supports and frames with a diameter of 50 mm and 28 mm rungs.

All scaffoldings

RA 330

Scaffoldings

RA 330

Technical data

Gallery

Frames made of pipes of 50 mm diameter and rungs of 28 mm diameter.

All scaffoldings

RA 1130

Scaffoldings

RA 1130

Technical data

Gallery

Opening entrance hatch in the platform.

All scaffoldings

RA 1120

Scaffoldings

RA 1120

Technical data

Gallery

High quality and durability of construction materials.

All scaffoldings

RA 1130 S

Scaffoldings

RA 1130 S

Technical data

Gallery

Platform dimensions - working area 1.35 x 3.00 m.

All scaffoldings

Company P.P.H DRABEX, manufacturer of aluminium ladders and scaffoldings

Contact